Tuesday, May 22, 2012

for Matt (but not me)




this is a fish i just finished up the other day for a fellow Matt. He wanted a more traditional fish as far as low rocker fuller down rail with a beak nose twin fin all that good stuff....soo her she is at 5'10" 22" 2-7/8" he got a burnt orange tint top and bottom and cokebottlie tint on the rails (that was done in lamination because its more gangster that way and life is about being gangster[normaly it is either airbrushed on post hotcoat or opaque resin panels not this time]) he got a gloss and pollish glass on matching keels,, leash loop..also we decided to do a sturdier version than what you typically see these days....we did green weight US Blank which is a denser foam then for the orange on the deck i used this super custom 5oz gnarly weave that looks almost like a straight up sheet of fiberglass and then the bottom got 6oz then 6oz for the rails and 4oz over the deck and rails to seal it all up. the shape has low rocker,,,with flat entry to vee started just ahead of the midpoint developing to spiral vee just ahead the fins and out the tail,,,this allows for the flat entry helps the board plane going into waves and down the line (faster) then the vee helps rail to rail transition since fishes have a tendency to be stiffer, and then the spiral vee helps with rail to rail but adds drive and control through turns and rodeo flips and stuff. the deck is pretty flat the rails are full and down railed with a beak nose and this thing is gunna be reall fun great for those days at pipeline.

Saturday, May 12, 2012

RIP Terry Martin

He was a nice guy and im am honored to say that i got to work on many of his boards over the past year. Truely a legend.

Tuesday, May 1, 2012

this is another shot of perry still killing it on that damn fish non-stop..he is down at some clean swamis enjoying the playful nature of the point reef break and the fish.


this is jeff's speed shape i finished early last week. The board's mechanics are a couple post back however the board got a sanded gloss finish with some glass on side bites for some more hold and drive while tightening up the turning radius. we decided to keep a center box so you can alter your center fin which can seriously change how the board rides. the bottom and rails got an abstract watercolor/ tissue paper esque lamination (that is resin in fiberglass not actually watercolor or tissue paper) the deck got an ultra subtle green tint to it...that is not clear i got you. and then dark brownish green pinline and logos....jeff says the board goes really well and thankfully we just got in a decent amount of swell to get this thing broken into. 

Saturday, April 14, 2012

jeffs speed shape

this is an 8'3" 21 3/4" 2 7/8"....wide point a bit forward with a curvey tail line..jeff wanted a board for when it gets head high and over. this board allows him to blow through the crowded peaks with early wave entry and ultra speed foil and rocker. this board is going to be a three fin and the rails are about 40/60 at the nose that flow down to a more modern shortboard rail with little more bite on the bottom with a lot of edge in the tail...the bottom is flat entry with mellow single concave to Spiral vee starting quite a bit ahead of the fins to flat off the tail. there is a bit of kick in the nose for those late take offs and tight cuts in critical sections...the single concave gives the board some stability and keeps the board on the wave and also gives you some lift while also flattening out the bottom rocker for superior trim,,,then the spiral vee being pushed forward allows for easier rail to rail transition without having to be on the tail block and gives you tons of drive through your turns,,just rocketing. the rail has a nice thickness to it too not chunky at all but not too crazy pinched where you get to catch rail your whole session...this thing is gunna fly stoked on it...jeff will love it.....also its get some crazy color work got another experimental lamination for the bottom of this bad girl.

Thursday, April 5, 2012

double step deck ready




9'6" 23" 3" double step deck....this board is gunna get test run for a week or so like this and then i am going to put carbon fiber where the steps in the deck are to see how that goes....the tail is foiled really thing and with the stringers being as wide as they are the last 10 or so inches of the tail have no stringer and i want to see the difference in the flexes and done want a limp flimsy flex at all soo we ll see...but yea so this board is made for hot dog loggin slashing turns with on overall more pinched rail and reall thin in the tail the steps in the deck allow for reduced swing weight=easier turning and for flex..there are no logos because i dont want to put them on then sand them off when i do the carbon and put them there again. this board also has a lighter glass job 6+6 deck 4+4 bottom it still has green weight foam so its solid,,,i like the feel of this weight a lot for a more "progressive" style log
carbon flex fin i did up for this bad girl..should give it a springier flex,,little more umpff out of your turns.
bottom,,,,blended concave to a tight belly with flat off the tail for positive direction change

Tuesday, April 3, 2012

for jake





Here is the finished thruster for jake,,,sanded this bad girl at 4 in the morning...so its 6'1" 19.5" wide 2.25" thick...its got a more relaxed rocker for versatility as a go to board. has a standard shortboard rail but i did leave the tail slightly fuller so he could spend more time surfing and less time bobbing around also it allows for more release which for the the smaller waves that we generally get around here will be really helpful in preventing the rail for catching......it has flat entry to single concave under the chest and out the tail...got super thrasher custom glass on fins i did for it...carbon rail savers and carbon Inca pyramid front foot patch for ultra stomping...uhm sanded finish....theres a leash plug on it,,its black ya i think thats just about all the main things...came out pretty fricken nice especially considering i dont really do them....also i am well aware the rail carbon is all crooked im not perfect and now i know not to be soo dumb next time