for kane

heres a 5'8" 18.25" 2.25" ripper model for kane...kane just wanted a high performance shortboard for doing all the ripping hold tight lines in the tube krankin cutbacks and punts. so here i came up with this, wide point a tad forward to help with paddling and holdin it down in the tube and then pulled the tail in pretty narrow,,the board has a good amount of rocker and he wanted to have some real thin pinched rails but in order to give him those rails and maintian some kind of volume for versatility i gave him a real low angled down rail all behind the center,,not like a 70's board at all a lot more mellow and the tail ends up with a nice flat panel to shred on top of...the bottom is single to double concave with flat out the tail and although theres a decent amount of rocker the entry rocker is still a pretty straight curve which will help out with the boards planning.....got the carbon tail patches and fcs thruster fin set up.....things gunna shred